KRAUS Kore 28" Undermount Workstation 16 Gauge Stainless Steel Single Bowl Kitchen Sink with Accessories
Cook, serve, and entertain in style with KRAUS Kore Workstation Sinks. Engineered with an integrated ledge to support custom sliding accessories, this sink creates a multifunctional workspace to streamline all your kitchen tasks from meal prep to cleanup. The kit includes a heavy-duty cutting board and roll-up dish rack that allow you to work right over the sink without losing space on the kitchen counter. Kore sinks are made with KRAUS TRU16 the thickest 16-gauge stainless steel for maximum durability. Undermount installation creates a seamless transition between sink and countertop, with no exposed mounting deck to trap food and debris for easy cleaning. The high-capacity single bowl sink creates an uninterrupted work surface with ample space for large cookware and stacks of dishes. Thick NoiseDefend sound dampening pads absorb noise and vibration for an ultra-quiet experience. Wear-resistant finish is easy to clean and not prone to corrosion, while rounded corners on the sink bottom reduce buildup over time. Channel grooves and a sloped bottom improve drainage, with rear offset drain that adds storage space underneath the sink. The installation-ready sink comes with a protective stainless steel bottom grid and drain assembly with matching cover for a clean look
Note from DirectSinks about the KWU110-28 - This 28" Workstation is one of biggest sinks for a 30" cabinet. ( Most cabinet walls are 0.5" or 0.75" thick, if you have framed cabinets, or thicker cabinet walls, please use the slightly smaller KWU110-27)
- Shop Related
Benefits & Features:
- WORKSTATION SINK with integrated ledge for sliding accessories so you can prep, cook, and clean up without losing any workspace on the kitchen counter Spacious 34-inch bowl allows you to handle the largest kitchen tasks
- DIMENSIONS: OUTER SINK DIMENSIONS: 28" L x 19" W x 10 1/2" D BOWL DIMENSIONS: 26" L x 16" W x 10" D MINIMUM CABINET SIZE: 30"
- SINK KIT INCLUDES: Stainless steel workstation sink, heavy-duty hardwood cutting board, roll-up dish drying rack, protective stainless steel bottom grid, drain assembly and decorative drain cover
- HEAVY-DUTY 16 GAUGE STEEL: Constructed from ultra-durable KRAUS TRU16 stainless steel our thickest 16-gauge steel for superior resistance to dents and damage
- UNDERMOUNT INSTALLATION creates a seamless transition from sink to countertop with no exposed mounting deck to trap debris Makes cleaning easier by allowing you to wipe water and crumbs right into the sink
- UNIVERSAL DESIGN with clean lines and tight-radius corners works with any decor from traditional to modern, enhancing your kitchen with functionality, style, and lasting value
- SPACIOUS SINGLE BOWL with large 26-inch length offers generous workspace for large cookware and stacks of dishes Rear offset drain creates more work surface and increases storage underneath the sink
- ULTRA QUIET SINK: NoiseDefend sound dampening technology with large super-silencer pads on all sides of the sink helps prevent noise and vibration from dishes and garbage disposals
- FULLY INSULATED with anti-condensation undercoating to reduce the risk of moisture build-up, helping prevent damage to sink and cabinets
- SUPERIOR DRAINAGE: Rear-offset drain opening and sloped bottom with channel grooves help prevent water from pooling in the sink OPTIMIZED SLOPE on the bottom of the sink helps keep your fragile stemware from tipping over
- HEAVY-DUTY CUTTING BOARD made with durable hardwood is not prone to cracking or warping, with a non-slip design and built-in grooves that prevent spills Easy to clean non-porous surface is resistant to odors and stains
- ROLL-UP DISH DRYING RACK made with heavy-duty stainless steel and non-slip silicone is perfect for drying dishes right over the sink. Holds up to 85 lbs., dishwasher-safe, heat-safe, and rolls up for easy storage
- STAINLESS STEEL BOTTOM GRID with soft rubber bumpers promotes better draining and helps protect the surface of your sink from scratches and dents by keeping dishes elevated
- STAINLESS STEEL DRAIN ASSEMBLY W/ COVER helps keep your drainpipe clear Removable cover conceals drain opening and garbage disposal for a clean look
- Explore the full suite of KORE Sink Accessories to maximize the functionality of your KORE Workstation sink
- Certs: ASME A112.19.3-2008/CSA B45.4-08, Uniform Plumbing Code (UPC), National Plumbing Code of Canada, International Plumbing Code (IPC)
- Collection Name: Kore
- Installation Type: Undermount: Typically installed with new quartz, granite, or other solid surface counter tops.
- Stainless Steel Thickness: 16 Gauge
- Warranty: Limited Lifetime
- Sink Certifications: cUPC (ASME A112.19.3/CSA B45.4)
Got my granite put in and I am totally in love with my kitchen with the amazingly stunningly beautiful granite countertops and my Kraus working sink that makes everything so much fun! Thank you so much!
Really excited about putting my sink in with all the cool accessories; still haven’t gotten my granite in yet so that has to be done first. Everything looks awesome!